1 / 3
Center Punch Hanging Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for hanging a center punch. Specifically to work with a magnetic hanger.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After I designed my magnetic drill chuck key holder, the world of attaching things to my drill press grew considerably. So, since the Center Punch is often something I'm looking for, I designed this simple brack that attaches to it and can hang from the previously designed holder.
I did use fasteners to hold it on, which wasn't my first choice, but I didn't want it drifting every time I hit the punch with a hammer.
Hardware
- Center punch with a 9.5mm shaft diameter.
- 2 x M3x8 countersunk screw.
- 2 x M3 square nut.
Printing Tips
- Sliced file for site metrics only.
- You will likely want to use a brim on this, but you might be able to get away without one.