Grippers for robot with 90 degree gears
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the grippers / pincers for my (150g) antweight robot, Tik-Tok.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 90
- Makes
- 1
- Views
- 728
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
These are the grippers / pincers for my (150g) antweight robot, Tik-Tok.
I printed at 50% infill to save weight, but the teeth on the servo gear strip very quickly, so I would recommend 100%.
Supports are only needed for servo_gear.stl
Post-Printing
The servo gear requires a cut down servo horn to function - I glued mine inside.
The hole between the grippers and the top piece takes M2 spacers, which are bolted onto the chassis.
How I Designed This
I used the SpurGear script in Fusion360 to make the main gear shape at the centre, then extruded at an angle to make a slight bevel, before adding the gripper arms.
I had to make some odd design decisions to make it all fit in the space I had available, and the gears are not perfectly mated (which is likely why they strip so easily), but they do the job.