Counting matching models…
Costco Grabber Holder Wall Mount Hanger Bracket Hang Costco Birdrock Home Grabber Tool handle left or right. Print hanger on back, no supports needed. Works with grabbers under 27mm (see pic). Can attach with command strips, or has two…
The DOG (in case you've forgotten: Doo-doo Obtainment Grabber) is a handheld doo-doo obtainment device. It uses a servo motor to control the right arm, for more control over not dropping the poo💩. I saw this contest page and wanted to…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle that can be dropped in vertically and…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle. The spool can be dropped in vertically and…
If you have a Thule Standard Upright Bike Carrier 525 (made between 1997-2001) and don't like the frame grabbing design, or can find one of these bike racks super cheap, this frame grabber upgrade will more securely (and softly) hold your…
Re-mixed "Costco Grabber Holder Wall Mount" for a more FDM printer optimized style. Store the Costco Birdrock Home Grabber Tool with the handle positioned to the left or right. Attach the holder with command strips, or use two screws in…
This tool has a 5x2 magnet inside the tube. A second or third can be placed to make it stronger. Press down on the finger loop and it picks up small metal objects. Pull the finger loop out and it drops them.
OnShade CAD Document Printed with PETG 4 wall loops 25% infil Modifier over tab 50% infil 6 wall loops
Reacher Grabber Tool Replacement Trigger. Two versions, regular and extra long. Cable path and trigger angle reconfigured to minimize cable wear and tear from sharp angles and excessive forces. Pivot hole reinforced to reduce chance of…
See photos for installation instructions. Owl-Reach is a crutch-mounted accessory designed to solve a practical challenge: managing a grabber tool while using crutches. It allows you to carry a grabber clip hands-free, so you can reach…
Print with original orientation with supports. designed for petg and petg-cf in mind. recommended 90% infill with petg. bottom top and wall layers set to 5. screw hole mount diameter is designed for dynamic disc's disc grabber ( M5 screw…
This is designed to allow you to expose however much of the DC power cable is required (I won’t swear to which of the 74 bajillion Dell power supplies this will work on, but it works for my USB-C power supply) and gives you a couple…
Reacher Grabber Tool Replacement Trigger. Two versions, regular and extra long. Cable path and trigger angle reconfigured to minimize cable wear and tear from sharp angles and excessive forces. Pivot hole reinforced to reduce chance of…
I designed this for the grabber sold at Costco. What would be better is if the handle had a hole in it for mounting on a hook. Anyway. I designed for the FDM printing process and no supports are needed. Its probably fine to print whatever…
A replacement for your Spear and Jackson Leaf Grabber. The Joint that connects the handle to the grabber breaks over time. Depending on your print you may need to bang it in.
Updates: [8.10.24] revisit 1: first testing feedback gathered. grabber sides are now parallel instead of an opening angle. distance between claws has been reduced to increas “grip” on lost disks. no changes to print settings etc. all…
Apple Grabber / Fruit Picker YouTube Short This is a printable Fruit Picker adapter for long sticks to reach the fruits in a higher range of the tree. The goal is to let the fruits fall into he cup and not to the ground, so that you don't…
It used to be possible to buy leaf grabbers that were slightly angled at the head (I think Gardman made them, but they've changed the design). That way you could pick up leaves that were a little further in front of you rather than right…
I created this for a friend to help easily pull out commander decks from his Gamegenic Game's Lair. Assuming you use Dragon Shield inner/outer sleeves you should be able to fit two double-sleeved and one single-sleeved deck in each row.…
If your yard looked like my yard this fall, then this is the print for you! We have lots of oak trees bordering our yard that every few years just unload the acorns. The dog was eating them, they were shooting all over the place with the…
A tiny (only 75mm) tool for grabbing a fallen soundpost inside of a viola or violin. Also a great help when setting the soundpost. The angled grip is necessary to hold the soundpost vertical inside the violin, so print with supports…
Costco Grabber Holder Wall Mount Hanger Bracket Hang Costco Birdrock Home Grabber Tool handle left or right. Print hanger on back, no supports needed. Works with grabbers under 27mm (see pic). Can attach with command strips, or has two…
This is a unique take on handling specimens in the 2024-2025 FTC game Into The Deep. This took many iterations and many fails. I would love for others to use this design and iterate upon it themselves. It was printed in PLA with a couple…
Made a small adjustment to the finger to secure the rubber band in place; otherwise, it would shoot upwards.
Need parts for your Bungee Grabber for your Longarm Quilting machine? This design will allow you to print everything you need minus the (2) torsion springs and (2) M4x6x6 heat set threads. I have never located a source for the springs. I…
The light above my desk is needed from time to time and usually only for a few moment. I am not particularly lazy, but it was a pain getting up out of my chair every time and it was also a pain having the chain low enough to reach. If it…
The Jellas foldable grabber / reachers joint is pretty weak. My kids broke it within the first week. This replacement stiffens the joint. PETG is still and still flexible enough and therefore recommended. Attached Fusion 360 Archive and…
This was remixed from 3D_Toys's The Claw Grabber II (Print & Play) I split the file for two color printing. I have a lot more designs so be sure to check them all out and follow me here at Polymathic Designs . Post your makes of this, I…
The original hard rubber cups, with a plastic core for the screw, don't do a particularly good job and are also easily broken. The plastic core does, anyway. I modeled these up to print in TPU and they work great. I made mine a little…
Replacement for the Fisher Price Fantastix toy set. My wife's set was missing these pieces, so I designed a replacement. Prints great in PLA with some supports. Fits the Fantastix foam noodles, but could also probably fit other foam…
Print model with 100% infill, attach to a strong rope. Slip device over fishing line, allow to slide over the swivel on the leader, and then pull up your fish by the leader. See photo: this was a test performed with 400# leader mono and 2…
You need 6x “Link”, 6x “Shovel” and 2x “Spyder”. All parts screw together with M3 bolts and lock nuts. Don't tighten them to hard, the joints have to move freely. Attach a string to each Spyder parts. Thread the string from the lower…
I modelled the black pincer of the trupper press to be an almost exact match to the default one in case you loose or break the original piece. I would reccomend using a 100% infill on this piece since it will be under load and lots of…
I'm participating in a 'Benchy Remix' contest, and I designed a SpaceX Starship with an Octagrabber, placed on a ship. https://www.printables.com/model/1219590-benchy-remix-freely-variable-length
A replacement part for the connector that allows the end of the grabber to rotate. These grabbers were sold at Costco around 2020 or so.
A clip that will allow easier carrying of a hand held grabber with the use of a collapsible walker. I used PLA when printing myself but to allow easier attachment and strength you might use PETG if on hand, otherwise PLA should work.
The DOG (in case you've forgotten: Doo-doo Obtainment Grabber) is a handheld doo-doo obtainment device. It uses a servo motor to control the right arm, for more control over not dropping the poo💩. I saw this contest page and wanted to…
This wand allows the user to pick up securely eggs laying on their side safely and easily. It works great for helping dye eggs without the messy fingers caused by touching the eggs. It also works great for placing eggs in and taking eggs…
This holder can be easily mounted on the back of a broom and used to lift a flag from a holder. No need to grab a ladder! Works well on 30mm diameter flag poles and up to 28mm brooms, or other poles.
A minor issue with front loading washers and dryers is that laundry at the back of the tub can be hard to reach, and for persons of a certain age this can be quite difficult (or for anyone else who may have difficulty bending and…
Onshape model Use TPU, wrap it on the round bar with the long leg pointing upwind (front of the vehicle). Slide to the width your canoe needs, strap it down with a good strap. NRS strap not required but they sure are nice! My print…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle that can be dropped in vertically and…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle. The spool can be dropped in vertically and…
Description: This Glove Grabber is designed to securely hold your work gloves when not in use. One side features a tight grip clip for your gloves, while the other includes a small carabiner-style hook to attach the tool to your safety…
If you have a Thule Standard Upright Bike Carrier 525 (made between 1997-2001) and don't like the frame grabbing design, or can find one of these bike racks super cheap, this frame grabber upgrade will more securely (and softly) hold your…
I went ahead & remade Coolioiglesias' latest grabber revision as a parametric for easy editing. I really should've just made my own --would've been a lot easier :v Category: Gadgets
I bought this component grabber and found it hard to hold when pushing down the plunger. It worked fine when gripping the tool tightly with the whole hand, but it was still slipping and not really user friendly. The hole has a diameter of…
Belt grabber with teeth on the opposite side for printers with flipped belts or custom Y assembly.
Carpe Mundum – Seize the World! Additional hardware needed for this project! Carpe Mundum is a system designed for quadriplegic individuals who have retained gross arm movement but have lost the use of their fingers. The goal of the…
Carpe Mundum – Seize the World! Additional hardware needed for this project! Carpe Mundum is a system designed for quadriplegic individuals who have retained gross arm movement but have lost the use of their fingers. The goal of the…
Assembly: Ensure that the build plate has very good adhesion, the nuts and bolts can come loos during printing. If you are using the stl files please note that you will need more than 1 of some components, each component has a note were I…
Grabber hook / reach bar arm that is lightweight and can be used to pull in things just out of reach.
Tired of struggling with poker chips during the game? 🎲 Here’s a 3D printed Poker Chips Grabber – a smart tool
The claw arm of my “Pik Stik Pro” broke and I made a replacement for it. I also made a custom shoulder screw to replace the plastic rivet. I ran a tap through the M6 nuts. At this small size, some printers are not so accurate with fine…
Grabber mask from the movie The Black Phone to print in one piece. Below are the printing parameters. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Grabber de la…
Re-mixed "Costco Grabber Holder Wall Mount" for a more FDM printer optimized style. Store the Costco Birdrock Home Grabber Tool with the handle positioned to the left or right. Attach the holder with command strips, or use two screws in…
Are you impatient like me and want to remove the build plate immediately after a print while it's HOT and put on another one to start another print? Well, this HOT build plate grabber is for you! It's especially useful after printing…
After a year of use, I am really happy with the base model, however it fell once and due to its size, it was tricky to find afterwards so I made this remix that holds better onto the tube. There are 2 model variants: the original model…
Friend loves those old-folks handy extension-grabber or pick-em-up helpers, and needed a holder to organize. Made this in Tinkercad. Holds 3 or more items depending on how you set them onto it. Holder is easy to mount to wall using…
This tool has a 5x2 magnet inside the tube. A second or third can be placed to make it stronger. Press down on the finger loop and it picks up small metal objects. Pull the finger loop out and it drops them.
"The heavy lifting of world domination!" Complete your ultimate Technodrome assembly line collection with the seventh and final unit: The Grabber . Seen as the primary heavy-logistics unit in the 1987 Teenage Mutant Ninja Turtles classic…
My Son broke the grabber of is Dickie Crane: https://www.amazon.nl/DICKIE-201139012-elektrische-afstandsbediening-laadplatform/dp/B07PX4GKMC So I made a replacement part for it, and it works perfectly. I printed it with PLA using a 0.6 mm…
OnShade CAD Document Printed with PETG 4 wall loops 25% infil Modifier over tab 50% infil 6 wall loops
If you have arthritis in your hands those new stubby little plastic-saving short caps they put on milk / half&half / etc. are painful to remove. This makes it easy to break them loose. I've saved several of the old-style tall caps and…
Trigger operated robot grabber. The jaws always stay parallel thanks to 4-bar linkages. The trigger operates a double rack and pinion system to open and close the jaws. Prints without support, and assembly is simple and quick. Download…
Tool for grabbing and placing mason jar lids while canning. Magnet makes pick up easy and plunger lets you deposit the lid on the jar without touching the lid. Prints with handles and top top on print bed. Both parts are printed together,…
Reacher Grabber Tool Replacement Trigger. Two versions, regular and extra long. Cable path and trigger angle reconfigured to minimize cable wear and tear from sharp angles and excessive forces. Pivot hole reinforced to reduce chance of…
The Robotic Grabber Arm is a 3D-printable mechanical gripper designed to pick up and hold small objects. The project focuses on creating a simple but effective robotic grabbing mechanism that can be used for robotics experiments, learning…
See photos for installation instructions. Owl-Reach is a crutch-mounted accessory designed to solve a practical challenge: managing a grabber tool while using crutches. It allows you to carry a grabber clip hands-free, so you can reach…
Grabbers (also called Reachers) are assistive tools to help people reach/grab items which are otherwise hard to get hold of. I happened to have one which was missing the "teeth" on the grabbing end (the yellow part in the photos). I also…
Extra parts to add to an injection molded extensors kit (available from http://www.mathmechs.com ) to make an extensor grabber toy. Designed by Will Segerman and me. The plunger comes in three parts. The shaft part (with one thumb hole)…
people were asking him for the screw peice to be done seperatly.so i did it
Print with original orientation with supports. designed for petg and petg-cf in mind. recommended 90% infill with petg. bottom top and wall layers set to 5. screw hole mount diameter is designed for dynamic disc's disc grabber ( M5 screw…
This is designed to allow you to expose however much of the DC power cable is required (I won’t swear to which of the 74 bajillion Dell power supplies this will work on, but it works for my USB-C power supply) and gives you a couple…
This set of tongs can be fitted with any of three sets of "jaws," depending on your requirements (see photos): scoop flat basket This model requires a #10-32 X 1/2" round head screw and matching nut for use as an axle. I made this to go…
Clip for EZReacher tool with integrated hanging hook. Fits 5/8” square section of reacher. Prints with no support. Recommend 100% infill for strength.
MOD for the ALE - antweight flipper entrylevel platform to add a grabber horns and long forks THIS CONTAINS ONLY THE MODIFIED FILES, PLEASE BUILD FULL MODEL HERE: additional screws required: x4 2.5mmx12mm wood screws for the tpu grabbers…
**UPDATE: 27/01/2017: Fixed the sizing problem some users reported.** I would recommend printing a couple at the same time so the prints have time to cool off.. or at least decrease the print speed. I got tired of forgetting the lightning…
MY FIRST UPLOAD FOR THIS CONTEST THIS IS A SPINNING TOP SPINS IN COUNTER CLOCKWISE -PRINT THE RIM WITH TPU -MAKE THE CORE A BIT HEAVY BY INCREASING THE INFILL IA DONT HAVE A PRINT SO I CANT TEST ITS PHYSICS FOR PERFORMANCE ,SO DO TRY IT…
Connector for the Sandal. Print with flexible material obviously. I've done it with soft TPU. After printing you should heat (small jet flame torch) the surface and smoothen it out with a tool or, as I did, with your finger. Take care not…
My niece broke this part on her KiwiCo mechanical grabber so I made a replacement. I printed it standing on its side with supports under the tabs on the back.
An extending Nuremberg-scissor (lazy-tongs) grabber-reacher themed as a snapping dragon . It has ONE moving mechanism and a single degree of freedom: squeeze the tail handle and the shared scissor angle shrinks, so the **neck telescopes…
Owl-Reach (Walker‑mounted grabber clip) Keep your hands free and your grabber close at hand. The Owl-Reach (Walker Edition) turns your standard or two-wheel walker into a hands-free tool station. Managing a grabber tool while navigating a…
Hang a Vive grabber within arm's reach from an IKEA bookshelf. Print Settings Printer: Cetus3D Rafts: Yes Supports: Yes Resolution: 0.3 mm Infill: 65% Filament: Hatchbox PLA Black Notes: No idea if this will be useful for anyone other…
The plastic coating had worn off on the grabber teeth of the Quick Grips of my Thule Ascent cargo carrier, so I designed this TPU replacement, to prevent damage to the crossbars from the metal teeth. Print vertically, with the opening…
Gripper 3.0 Grabber for stuff like trash, used tissues or to get potato chips out of the bag without getting greasy fingers or whatever.... I ate a whole bag of delicious crisps without touching a single chip with my fingers. It's…
This is a remix of Cisco's Flexy Pliers Its all done in OpenScad so it can be adjusted I also removed the pins and replaced with compliant mech and it seems to work :) I am going to do another remix with one smaller that will print in…
This is a remix of Cisco's Flexy Pliers Its all done in OpenScad so it can be adjusted I also removed the pins and replaced with compliant mech and it seems to work :) This is a smaller version I made see…
![#0015 (HOT) Build Plate Grabber [Finger Mitts]](https://media.printables.com/media/prints/152297/images/1432281_1bedba73-6f48-4b49-b55b-35c6b88943a5/grabber.jpg)
