1 / 1
Filament Storage - Free Standing (Flat Sides)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified version of the Free-Standing Filament Storage rack by @JohnMartin
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 139
- Makes
- 0
- Views
- 928
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slightly modified version of the free standing filament storage rack by @JohnMartin.
I am using 1.2m Wooden Dowels with my build so I wanted to add one of these to the middle fo the dowels to give it some support, but didn't want it to have curves on one of the sides so I quickly modified the model in Fusion360.
It is printed with the below settings:
- Nozzle: 0.4mm
- Supports: None
- Layer Height: 0.2
- Infill %: 15%
- Infill Type: Gryoid
- Brim: None
- Supports: Yes
- Support Type: Default
On my BambuLabs P1S it took about 3 hours to print at 200mm/s
All credit goes to @JohnMartin for his great models.