Enviro Urban external case - mini - by PIMORONI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought Enviro Urban full of sensors (PM, Temp, Hum, noise...) and I wanted to install outside, then ....
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I bought the Envito Urban with Pico W Aboard with a a BME280 sensor for measuring temperature, humidity, and pressure, a microphone for noise monitoring and a pre-installed PMS5003I particulate sensor.
You can find additional information on the Pimoroni website.
I wanted a small case and to be supplied with usb (not a battery), all the other cases were too big, so I designed mine. It fits like gloves.
you can find:
- the SLED: which holds the Enviro Urban without screws or glue.
- the external case, with binaries to let the sled to slide inside, a couple of glue drops can hold the sled completely
- the lid, which is not exactly a lid, but it allows to close everything, it just slides too. I glued it.
- the hook to be glued at the top, if you like.
Everything can be printed without support.
I use enviro Urban sending mqtt data to my internal broker I attach an example of the data sent and that you can easily capture using node-red. I use also nodered to send the data to Influx the way I like it and not as designed.
as usual Enjoy!!!!
and if you improve the case just let me know.
Cheers