1 / 2
Lead screw cover with recoverable any thickness magnets for X1C/P1P/P1S — image 1
1 / 2

Lead screw cover with recoverable any thickness magnets for X1C/P1P/P1S

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Any thickness 6mm or 8mm magnets. The magnets can easily be removed/recoverable.

Rating
5 / 5
Likes
18
Downloads
148
Makes
1
Views
1,195
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the lead screw shield by chiz.

I modified 4 things:

  1. Magnets are now easily recoverable as oppose to inserting/gluing them into a tight fit hole.
    1. The magnets are now inserted from the outside, so it allows for any reasonably thickness.
    2. There is now a thin layer of plastic at the contact surface.  Effectively, the magnets can easily be recovered if the part is no longer desired.  Simply push the magnets back out – destroying the thin plastic layer if necessary.
  2. Shaved 0.5mm off the cover surface.  From 1.5mm to 1.0mm.
    1. The original design had a 1.5mm thick shell, which I find is uncomfortable with my P1S print plate.  I shaved this shell down to 1.0mm, which fits and has a nice gap.
  3. Added a 6mm magnets variant
    1. In addition to the original 8mm magnets variant
  4. Removed the built in support
    1. I use paint on support where support is necessary

NOTE: Do not add support to inside the magnet holes.