1 / 3
Drybox Desiccant Spacer/Standoff for filament storage in 5 gallon buckets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple spacer/standoff to keep a gap between filament spools and desiccant in 5 gallon drybox buckets.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 95
- Makes
- 1
- Views
- 473
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I was tired of finding desiccant pellets embedded in my filament spools, so I designed this. It fits loosely in the bottom of a 5 gallon bucket (commonly used as a DIY drybox) and provides ~40mm of clearance for desiccant below your filament spools.
Can be printed on a 220x220mm bed, though it's a tight fit, and you may have to disable the skirt in your slicer. Easily prints with no supports. I used a layer height of 0.2mm and 15% infill, and with those settings it used 33.7 grams of filament.