Drybox Desiccant Spacer/Standoff for filament storage in 5 gallon buckets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple spacer/standoff to keep a gap between filament spools and desiccant in 5 gallon drybox buckets.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I was tired of finding desiccant pellets embedded in my filament spools, so I designed this. It fits loosely in the bottom of a 5 gallon bucket (commonly used as a DIY drybox) and provides ~40mm of clearance for desiccant below your filament spools.
Can be printed on a 220x220mm bed, though it's a tight fit, and you may have to disable the skirt in your slicer. Easily prints with no supports. I used a layer height of 0.2mm and 15% infill, and with those settings it used 33.7 grams of filament.