Car Battery Clamp Fix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.60 – €0.74 net (excluding VAT)
For file: battery-clamp-base-draft_0.6n_0.4mm_PETG_MK3S_29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 29.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement part for a broken car battery clamp on a jump start booster battery thingy I rely on.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 109
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Just a replacement part for a cheap car battery pack clamp that broke, Streetwize brand from Argos. Measurements are not particularly precise but it fits and is functional. Draft print broke at a similar weak point so I reinforced the model for strength at that point. Recommend slicing the model yourself if you are using it, included gcode is for the draft print.