1 / 2
North and Southpole of a Magnet — image 1
1 / 2

North and Southpole of a Magnet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Often had the problem to orientate the poles of magnets for functional parts so that they correctly attract each other.

Rating
5 / 5
Likes
23
Downloads
104
Makes
2
Views
861
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Often had the problem to orientate the poles of magnets for functional parts so that they attract each other, rather than repel each other. Provided this is not intended.

I use magnets for closing boxes, cases, etc. But also for the Klicky-probe of my Voron 2.4. Here I replaced the probe the other day and did not pay attention for the poles, thus leading to reprint the klicky and pay a 100% attention to the poles. Usually it is okay that the magnets fit, means attract each other. But sometimes it is not a bad idea that you know who is who in the north-south game.

When you do this 100% carefully, you will easily identify North & South for the rest of your life!

So I built this little stl, provided N and S in the PrusaSlicer as added text. Then started with red (North) and made a filament change after half of the print for green (South). 

  • I oriented the magnets that way that I checked out polarity: You add 10 magnets in a row, put a slim yarn in the middle, then wait where the magnets towards. 
  • Now I found out (thanks to GoogleEarth) which side showed to Earth-North. For the magnets I determined this a South! Because South is attracted to the North Pole!
  • Little drop of glue into the South-Pocket (Green) and push the magnet in. The rest is trivial.

I printed the part on my MK3S+ with MMU2s. Starting with Red = North Pole. Layer 12.2mm printing Green = South Pole.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tags