Knitting Needles (different sizes) - Stricknadeln
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just some simple knitting needles, that can be printed in two seperate parts and jointed together.
- Rating
- 3.5 / 5
- Likes
- 78
- Downloads
- 731
- Makes
- 3
- Views
- 2,917
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The models come in different sizes. I uploaded diameters of 4mm, 5mm, 6mm, 8mm, 10mm and 12mm each in a 150mm, 200mm and a 250mm version. If you are not sure, wich one to choose, just get the 8mm x 200mm version, it is a good place to start.
Printing and Assembly
These simple knitting needles are printed in two parts and are then jointed together using some short 1,75mm filament-strips that act as dowels. That makes them easy to print laying down flat on your printbed.
Optional Finish
If you want, you can add some glue and/or give them a sanding to make them even smoother after putting them together. Therefore it is the easiest way to ut them in a dril and turn them while using the sand paper.