Extrudr Spool Weight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spool weight for NX2, DuraPro ASA, PETG and probably other Extrudr spools.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 71
- Makes
- 1
- Views
- 1,072
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Standard Digital File License
I wanted a spool weight for my Extrudr spools so this happened. It has holes in each end for optional desiccant. It has been verified as working with the following Extrudr spools:
- 1kg PLA NX2
- 750g DuraPro ASA
- 1.1kg PETG
This spool weight screws up reassuringly tightly compared to others I have. It is recommended to close and open it a few times before you use it the first time to wear it in a little.
Printing
The model is designed to be printed directly on the print bed with no supports. There is a Bambu Studio version available pre-configured for Bambu Studio.
I used a 0.4 nozzle with a 0.2mm layer height for everything, and printed the above model using Extrudr NX-2 metallic.
Versions
2023.12.09: Remove final chamfered edge to aid printability. Add text on side of barrel so it is easy to tell what type of spool this is for. Fix an internal edge to help prevent defects.
2023.12.07: Following feedback, modify the bumps to not be chamfered, be longer and have an easier to grip surface, to allow it to be closed and opened more easily.
2023.12.06: Initial version.
Support
If you like our work please consider joining our club here on Printables!