CR10 Max Y axis MGN12H linear rail bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y axis bracket for MGN12H linear rail conversion on a CR10 Max
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 125
- Makes
- 0
- Views
- 1,086
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here is a bracket i designed for converting my CR10 Max to linear rails on the Y axis.
No modification to the bed is needed!
The bracket uses alignment tabs on the six big holes on the bed (three on each side)
You will need to source six DIN ISO 7380-1 M5x20 mm bolts or cut down the standard bolts.
The rest of the stock mounting hardware can be reused.
For the MGN12H carriages you will need sixteen M3x12mm bolts.
I printed the brackets in PETG-CF
- 0.2 layer height
- 20 % infill (gyroid)
Y axis end stop has to be relocated i recommend using this model.
https://cults3d.com/en/3d-model/tool/creality-cr10-max-y-axis-endstop-housing-for-linear-rail-conversion-ki