187 models
Useful print to have when washing MGN12H carriage blocks in IPA in an ultrasonic bath or when you want to thoroughly clean/lubricate your linear rails without accidentally knocking the carriage off and having to pick up all the little…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Same as Heat Insert Press by BAGooN but modified to use MGN12H linear rail. This is a compact heat insert press that utilizes a 150mm linear rail with MGN12H block that is avalable on amazon. Follow BAGooN's instuctions as the only…
Print approx. €10.68–€13.06 excl. taxPreliminary estimate for PETGSource material: PET
A Hotendmount for V6 Hotends on MGN12H Rails with a bowden system. I desgined it because i couldn't find something with a sensormount for a M18 Z-sensor. I added some holes for zipties to manage you cables. The belt is mounted with some…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
EVA3 dropped support for MGN12H and here I am adding it back in! Keep an eye out on www.3dpandme.com for full installation pictures and content. BOM: 4 x M3 inserts Support me by buying your dragon hotend (or any other 3d printer…
this can be used on the Trident This Requires 2 M3 heat inserts in the Key to work properly. 3 M2 heat inserts for the pcb Klicky version This a Mount for the Voron Dragon Burner on a MGN12H. Can be used on any printer with the belts on…
Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…
These linear rail MGN12 and the block MGN12H objects with exact dimensions, are intended as help tools in prototyping and designing. There are 2 types of rails, one without holes, that can be elongated/stretched to any desired length by…
::edits again:: So I've come across a much more elegant solution for the Orbiter 2 mounting setup @ https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed I recommend this over the one in here. So skip the orbiter…
Tested on SE. Fits KE. Updated V4 with spot to attach your Input Shape Sensor (WARNING: this mod is not meant for beginners. Nothing wrong with being one but you might be over your head with this one. I am an experienced Machinist and…
Top for EVA 3 MGN12H instead MGN12C. For sensorless homing.
This mount is made to accept a dragonburner/mini stealthburne for ender 3 neo printer with linear rail in the x axis. Print with minimum 4 wall and +40/50 infill you can go 100%. Height of cr-touch can be changed when you want . Made an…
It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion. [UPDATE] Through some changes…
This remix allows you to easily mount an Eddy probe on a Dragonburner toolhead. I used Chirpy's 'Carriage_Base_Short' as the base for this design, making adjustments to fit the probe securely. It keeps the probe at an optimal distance for…
My take on the Duender by Sergei Irbis. This version uses MGN12 linear rails with H size bearing blocks and adds mounting points to use end stops if you prefer those to sensorless homing. For the configuration I used, you will need the…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
******************************** Update: I've added a cut out to mount an end stop as I personally need one and I like having the option available for others :) ********************************* This is a remix of Gulsifer's wonderful…
CR-6 SE Y-axis Linear rail and MGN12H carriage mount This conversion method DOES require you to replace the Y-axis belt, but unlike some other projects doesn't require you to cut the rail. Required Supplies: 2x 350mm long MGN rail with…
It started by finding the original model of the “ Heat Insert Press ” by BaGooN, which I really like! since I still have some iglidur i150 filament lying around, I thought, hey why don't print the rail and the carriage by myself? but the…
UPDATE - Included new (untested rear plate). I wasn't very happy with the clamp version to hold the belt. This is more HeroMe-ish. If you try it out, please let me know how it works. I have one ready to test but I just haven't had the…
I didn't want to buy limit switch PCBs, so I designed an upper mount with an inbuilt limit switch
I wanted a design to fit an MGN12H rail that I have on my custom printer so I thought I'd alter the existing top on EVA 3 to accommodate both MGN12C and MGN12H
Remixed backplate to add extra strength, holes for nylock m3 nuts, and flush cap head screws for the linear rail.
Replace the V-Slot-Rollers on your Sovol SV05 with MGN12H linear rails using these adapters. The belt tension on the Y axis will increase slightly with this mod, but this shouldn't be an issue. You will need some additional hardware to…
Minimal print area loose. No end stop adjusting... This project is based on SK-Tank CF BMG Dual 5015s Mount by declinox. https://thingiverse.com/thing:5182358 ) I find his design while looking a project for “MGN12H rail system, BMG…
Stückliste: Linsenkopfschrauben oder Zyl. Für den Halter 2x M5x8 Für den Schlitten 4x M3x6 Für die Winkel 6x M3x8 Für die Winkel 6x M3x14 Einschmelzmuttern 7x M3s Einschmelzmuttern 2x M5s Linearführung MGN12H…
This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the CoreXY belt configuration on the Mercury One.1, Voron 2.4r2 and maybe others. When doing the build,…
required hardware: 4pcs FHCS M3 5mm 4pcs M3 square nut (5,5mm x 5,5mm x 2mm) Zen3D
The stopper has a M4 counterhole. Simply mount it on top of the cheap 2020 belt tensioner. Now the carriage can't leave the rail anymore. On the other end of the rail sits the x axis endstop to do the same. The model was designed around…
MGN12H rear Z carrier for Trident-R1 CHANGELOG 01.05.2023: WobbleX - Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 25.04.2023:…
This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the stock belts If you are looking for an adapter using CoreXY belt config, check here:…
This is a gantry conversion kit for the TronXY X5SA 400. It should work with the other X5SA models however you'll need to adapt the length of the linear rail (450mm for X5SA 400). Check out the installation video here:…
Die Y-Linearhalter sind ein Remix von: https://www.printables.com/pl/model/169489-anycubic-vyper-mgn12h-y-axis-linear-rail-kit?fbclid=IwAR2GCK7LIJAdjURp8Q7YlXN_zA7_29ol_zSFM_jpIRnWyBzvQ_V145M47dc Stückliste: Linearführung MGN12H 2x…
I remixed Chirpy's original MGN12H X Carriage model to add some mount points that interface to the bottom “feet” of Chirpy's PCB Mount for the Sherpa Mini for extra toolhead rigidity.
Modified X-Carriage for Voron Stealthburner Toolhead Severely bastardized x-carriage for this wonderful Prusa Bear Linear Rail mod by @Thehead Starting parts for the carriage mod came from @Sebastian - I used his carriage he made for the…
Remixed for my Ender 5S1 Mercury One.1 with a 235x235mm bed.
I took design inspiration from the Printer Mods Y-Linear Rail kit. This design fits Creality-style printers that use their heat bed mounting scheme. The gantry frame mounts to the brackets with M5 screws and washers. Mount the brackets to…
Note: This is for the older Ender-3 printers with the flat/z-shaped front Y idler bracket. Here's the mod for the newer style with the U-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…
Material: ABS / ASA /PETG Infill: 40% Supports: No Top/Bottom Layers: 4/5 Wall Line Count: 2/3 Italiano: Questo progetto permette di installare il Bl-Touch all'interno del carrello, con una copertura per proteggerlo dal calore English:…
Actualización 22-12-2024: Añadido última versión en formado step. Soportes para guías lineales Eje Z MGN12H de longitud 400mm. Necesario comprar: Guía lineal MGN12H + Carril 400mm (x4 pro) 28 T-nut M3 ( sujeción guía lineal al perfil ) 8…
I reworked the original XOL Toolhead mount to fit on an anycubic vyper or similar printers. I have also added a mount for a BL-Touch. Works for the low XOL-Toolheads like for Phaetus Dragon or Bambu Hotend. Clamps have been fitted to…
I noticed the original Y-limit switch bracket on Ender3/Pro style printers was not appropriately aligned to make contact when mounting linear rails to the extrusion. Additionally, I noticed that I lost about 10mm of print size on the…
Design goals: re-use with minimal hardware changes the original parts (except the fans assembly/shroud, see below) minimal number of printed parts extremely simple design of the printed parts Carriage adapter has large (10 mm) sides for…
Note: This is for the newer Ender-3 printers with the U-shaped front Y idler bracket. Here's the mod for the older style with the flat/z-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…
This mod will add a 2020 aluminum extrusion to your Y carriage. This allows you to mount your rail onto the extrusion and will give additional support to your Y carriage. Needed Hardware 1 150mm 2020 Aluminum Extrusion (for normal size…
The original author of these files uploaded a STEP file which required isolating the mount then saving each component as an STL. I have done the work for you.
Adapted SimpleCore XY to use MGN12H
Prusa Bear Linear Rail MGN12H Voron Tap X-Carriage Modified Voron Tap MGN12 carriage to work on Prusa Bear Linear Rail mod by @Thehead Voron Tap >> https://github.com/VoronDesign/Voron-Tap Integrated belt tensioner by @humebeam…
It combines Xol monolith carriage with dragonburner mount. For MGN12H block and 9mm belts. Added more screws to secure belt clips. WARNING: The middle screw should be the same level as the top and bottom screws; if not, the worst…
A endstop for 2020 Profiles. Designed for collision with the carriage.
Tool used to center MGN9H rail on a 20mm wide piece of aluminum extrusion while fastening it down as seen in the following video: In this episode, I assemble the X gantry with the newly designed MultiJet Fusion printed parts, and install…
In adapting the Eva 3.0 toolhead for my Ender 5 I needed to adapt it for a fixed endstop sensor on the right side and to fit my MGN12H rails. This model removes the endstop mounts from the left and adds a bumper on the other side. The…
I have made core XY MGN12 3D Printer. Printer dimension of 440X400X600 and Printing dimension of 200X200X300. Print instructions Category: 3D Printers Summary I have made core XY MGN12 3D Printer. Printer dimension of 440X400X600 and…
Here is a bracket i designed for converting my CR10 Max to linear rails on the Y axis. No modification to the bed is needed! The bracket uses alignment tabs on the six big holes on the bed (three on each side) You will need to source six…
After adding MGN12H linear rails, the limit switch on the X axis has to be 8mm higher. That means, that the stock stepper pulley cover has to me removed to make more room for a custom limit switch adapter. Pulley Cover : I created two…
Mega Mods Collection for the Voron Trident R2 (Everything already tested and safe to print and use) Since I always heavily modify my Voron printers, I've decided to upload all of the R2 mods I've designed so far in one package. Every…
Edit: added zero-g diffuser for the cowl with the logo. based on the voron diffuser, all measurements match. printed and tested, let me know if there's any issues and I'll fix asap.…
I'm currently running a Stealthburner and an X-axis linear rail on my Ender3V2. But I was tired of losing bed space to an ADXL-mounted CR Touch. This is my solution. I've remixed prasadp4009's CR-Touch Switchwire mount to print better (no…
CR6 Linear Rail Hotend adapter Project under development! I'm working on some adapters that might make is easy to mount the stock hot end onto linear rail using an MGN12H carriage. Mounting the rail on the front of the x-axis does move…
Use M3 heat inserts Ready to use chains Bltouch support offsets X -21 Y -40 5015 blower fan some supports for zip ties
Remix of ultimate X axis upgrade for MGN12H instead of 15.
This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…
For generic 3018 CNC machines, Genmitsu etc. - i did not want to print the Z carriage but wanted to have more rigidity since i do engrave metals and have seen the deflection when pushing it a bit, and i had 2 spare mgn12h linear rails…
Salut la commu' ✌ Voici une solution de montage de l'axe Z sur paliers MGN12H. Comprend un montage pour convertir en double Z. Comprend également un support pour décaler le end-stop de l'axe Z ! Pièces conçues de sorte à être résistante.…
I needed the mount that IzFunk3 made but with the endstop part
Couldn't find an adequate MGN12H dummy carriage to be able to mockup my toolhead before I have linear rails. Uses 4 heatset inserts, print standing vertically as shown. BOM: 4x M3x5x4 Heatset Inserts (Voron spec)
Prusa Bear Linear Rail MGN12H Mini Afterburner X-Carriage Bastardized in tinkercad - x-carriage for Mini Afterburner derived from @sebastian's VRN-10s Pro Mod for Cr-10s Pro - carriage.
Started to work on a doing a Voxelab Aquila Switchwire conversion and needed to modify the Y axis bed carriage for the factory plate. You can use either standard or nyloc (preferred) M5 hex nuts. This model is based on Revision 2. Major…
Modify original Voron V0.1 X Carriage (MGN7H)
Prusa Bear Linear Rail MGN12H X Rail Bottom Belt Modified X rail mounts to support Voron Tap Remix: https://www.printables.com/model/389714-prusa-bear-linear-rail-mgn12h-voron-tap-x-carriage Voron Tap >>…
.3MF and .step atvailable (400mm for the 3MF and 420mm for the .step, adjust to your liking in your CAD software)
Created based on the models from this project created by u/ zruncho , from a suggestion I got by u/ computermedic78 for a cheaper alternative to metal rails. The original z sliders were designed for 1515 extrusions on a Voron v0.1 variant…
⚠ PRINT VERTICALLY (on the side) — same orientation as the original model. Do not print flat! This is an improved remix of the MGN9/MGN12 block/carriage disassembly helper. It adds a rubber stopper feature at BOTH ends of the rail,…
Mod for using nuts instead brass inserts.
Minimum displacement of hotend position (3 mm), I didn't adjust mriscoc firmware (neither bed size not hotend position). Using regular M5 nuts for original hotend plate mounting requires 2 M5x10 bolts. Since I used thick nuts to mount the…
When I upgraded from v2.4 to v3 I still wanted to use my old mgn12h rail
I just remix the Voron 0 original threaded E3D v6 MGN12 toolhead with the original Tiny-M v4 Toolhead (old repository) - https://github.com/gsl12/Tiny-M YOU NEED TO PRINT THE NEW RETAINER, OTHERWISE YOUR BELTS ARE BIND!!!!!!! Enjoy and…
Trying out this duct from this project: https://www.orbiterprojects.com/beltender-linear-rail-upgrade-for-ender-printers/ It's pretty minimal and esthetic, still waiting for better 4010 blowers, but had to fit NF Crazy hotend on it.
This is the top of the Bishop 3D printer that has been adjusted for the MGN12H rails. WARNING: I oreanted them in the best position for printing; please verify that your layer adhesion is good before attempting these prints. if there are…
This should work for any application needing to mount an extruder with the same pattern as the Smart Orbiter 3 to a 20X20mm bolt pattern MGN12 rail. Belts wrap around the base plate and use clips or any other fastener to hold them. Print…
StealthBurner MGN12H Linear Rail mount for Ender 5. Due to a number of factors, the Ender 5's belt placement and mounting makes standard mounts not possible unless you're willing to convert to a CoreXY like ZeroG Mercury.One. I wasn't…
These are modified stock ratrig v-core 3.1 bed arms that allow the use of MGN12H carriages instead of the MGN12C ones. Hole locations where changed along with making all the M3 nut provisions to heat-sert inserts.
Print face down using supports. Model uses two heated inserts to fasten the toolhead. Belt is reversed and fastens at the top of the gantry. This requires you to reverse the direction (invert) of the stepper motor. The belt length is…
See the great work of InnovationWorkstation (and its predecessors) https://www.printables.com/model/141464-bear-linear-rail-y-axis-modification, I only changed the holes position by 5 mm to be compatible with MGN12H that I ordered instead…
Work In Progress - Some parts not fully tested. Made these remixed parts to upgrade my Ender 5 on a budget with the option of later upgrading to Mercury One.1 or Endorphin. EVA 3 is easily one of the best toolheads out there and the E34M1…
MGN12H: https://www.aliexpress.com/item/1000007480470.html?spm=a2g0o.home. vslots not enough smooth for me near nowadays
Linear Rail Spacer Set for Ender 3 S1 / S1 Pro (MGN12H Upgrade) Upgrading your Ender 3 S1 or S1 Pro to MGN12H linear rails? You’ll likely run into clearance issues where the rail carriages collide with a raised section of the lower…
The 3D model is an adapter for mounting MGN12H linear rails in the Voron 1.8 printer. The design is not aesthetically refined, but it has been tested and works reliably in my printer. It provides a stable rail mount, improving axis motion…
Hello i was searching for a mount for my printhead on a MGN12H rail but i found none. The problem was that i already had the wrong rail. You should probably use a MGN9H rail. But anyway, you should print The bracket in the orientation it…
ENGLISH This is MGN9C to MGN12H din rail adapter It was necessary for me to mount my rail on my Ender 3v2 with the model offered by SirStorm FRANCAIS il s'agit d'un adaptateur de rail din MGN9C a MGN12H il m'a était nécessaire pour monter…
Musíte mít pokud si jako já koupíte místo velkých vozíků ty malé a nemáte čas čekat, až vám přijdou ty správné. Vytištěno z PETG, 3perimetrie, 4 vrsvy dole a 4 nahoře.
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
alignment jig for aligning MGN12H linear rail used for Ender3 (Y-axis Upgrade), but can also be used with other printer models
This is a mounting part for the X/Y-Endstop pod of the Voron 2.4 wirh MGN12H
This is a height stopper for the MGN12H as used in Stealth Press 1S by IconicFAB , making it possible to fix the the arm at different hights. So you don't need to move all the way up when inserting with several inserts. Print front side…
Revision Log 2026-02-25 -- Initial Release BOM: Qty 8 - M3 Brass Inserts Qty 6 - M3 x 16 Socket Head Cap Screws Print Settings: Material Used: Inland (Micro Center) PETG-CF I just followed the Voron spec for this one: Use PETG-CF or…
I really liked the idea of @BaGooN mountable base, I have several unused cutting boards laying around so. But the MGN12H rail was cheaper and easier to get a hold of so, I appreciate the remix @JCPhlux_19355 . I did remix the top piece…
Hello, to download conversion kit from V-wheels to linear guides Y-axis, set fits MGN12H bearings, you can print the mounting part for the bearings and screw the original tevo table handle on it, or mill the aluminum file of the new table…
MGN12H 400mm for linear rail upgrades and Voron build modelling MGN12H An MGN12H is a compact linear‑motion carriage designed to run on an MGN12 miniature linear rail. It’s part of the Hiwin‑style “MGN” series commonly used in 3D…
Mounting kit for the BIQU H2 Direct Drive Extruder with drag chain
