ion LUXE Airstyler wall mount holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hair dryer wall mounted holder.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About the design
This wall mount is designed to hold my wife's LUXE Airstyler hair dryer, curler. The holder accommodates the weight and size of the styler unit and has a notch for the handle +cord to hang down.
Printing Instructions
- 0.4mm nozzle
- 4 walls (perimeters)
- 0.22 layer height
- 25% infill
- PLA or choice of material
- Supports required
Print the part oriented on a 15-degree angle from the print bed with supports down to the plate/bed. No additional supports required for the upper round arms of the holder.
The holder attaches with screws through 4mm holes in the back plate. 8mm space is available for screw heads to seat flat.
Printed in colour changing Silk PLA at 150mm/sec on the Flashforge 5M Pro. The photos are not showing layer lines, but colour change of the filament layers. Print time: 5 hours.