Heat set insert rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple heat press tool that uses a modified parts like 608 bearings and the LeaderPro, 80w, soldering iron.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remake of two different modells.
This model is adapted to use 608 bearings and Leader Pro 80w, soldering iron.
https://www.prusaprinters.org/de/prints/76059-jo-presser-threaded-insert-heat-press
https://learn.adafruit.com/heat-set-rig/overview
I have taken different parts that i could use with 608RS bearings.
- Roller Carrige
4x ball bearings 608RS
4x m6 nuts
4x m6 screws
2x m4 inserts
2x m4 screws (to fasten arm)
- Arm
2x m3 inserts
2x m3 screws 10mm (to fasten solder pen holder)
- Solder pen holder
4x m2.5 10mm screws
4x m2.5 inserts
- Pulley idler
1x bearing 608RS
4x m2.5insert
4x m2.5 short screws
1x m3 insert
1x m3 screw
(I used some washers so that the bearing was fixed)
- other
Use some string to connect roller carrige to the weight holder
- Iron holder
4x m2,5 insters with screws
and a small pieace of resistance band to make the soldering iron from falling out. Use what you have to fixat it properlly in the holder.
- Soldering Iron
As counter weights I have used nuts with a diameter of 29.9mm