1 / 2
Lutron Caseta Diva slider cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knurled cap for the slide dimmer on the Lutron Caseta Diva smart light switch that makes it easier to use.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a friction-fit cap for the little dimmer slider on the Lutron Caseta Diva dimmable light switch. It has a knurled concavity that gives good grip against your fingertip, and makes the switch much easier to use than the stock slider.
Print Instructions
NOTE1: This model is designed to be printed with a 0.25mm nozzle. It will likely not work with a 0.4mm one!
NOTE2: I recommend printing this at 50% speed.
Orient the slider cap on its side when printing.
The assembly in the pictures was printed at the following settings:
- Printer: Prusa Mini+
- Print Settings
- 0.1mm layer height
- 3 shells sides
- 5 shells top and bottom
- 15% infill
- Filament: Prusament PLA Pearl White
- Supports: none
- Brim: none
Assembly Instructions
- The cap is designed to press-fit over the existing slider nub. Don't shove it too hard or you'll break your switch. If it simply won't mount, resize the model a few % in your slicer.
- Enjoy your much-easier-to-use Diva dimmer!