Lutron Caseta Diva slider cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knurled cap for the slide dimmer on the Lutron Caseta Diva smart light switch that makes it easier to use.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a friction-fit cap for the little dimmer slider on the Lutron Caseta Diva dimmable light switch. It has a knurled concavity that gives good grip against your fingertip, and makes the switch much easier to use than the stock slider.
Print Instructions
NOTE1: This model is designed to be printed with a 0.25mm nozzle. It will likely not work with a 0.4mm one!
NOTE2: I recommend printing this at 50% speed.
Orient the slider cap on its side when printing.
The assembly in the pictures was printed at the following settings:
- Printer: Prusa Mini+
- Print Settings
- 0.1mm layer height
- 3 shells sides
- 5 shells top and bottom
- 15% infill
- Filament: Prusament PLA Pearl White
- Supports: none
- Brim: none
Assembly Instructions
- The cap is designed to press-fit over the existing slider nub. Don't shove it too hard or you'll break your switch. If it simply won't mount, resize the model a few % in your slicer.
- Enjoy your much-easier-to-use Diva dimmer!