ESP32 Camera Mount for MK4
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.69 – €2.06 net (excluding VAT)
For file: Camera_case_0.4n_0.2mm_PETG_MK4IS_1h51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.88 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.84 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cheap solution for a camera you can use with Prusa connect
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I started using PrusaConnect, I have been playing with the idea of using an ESP32 Cam for remote monitoring. After some searching, I found a software solution or description for integrating the camera into PrusaConnect. See https://github.com/johnyHV/PrusaConnect_ESP32-CAM.
Also very helpful was a thread I found in the Prusa forum: https://forum.prusa3d.com/forum/user-mods-enclosures-nozzles/esp32-cam-support/
Because I didn't like the ready-made solutions 100%, I made my own design. But thanks a lot for the inspiration.
Printing
I printed the parts with 0.2 layers. Supports are only needed for Camera_case_05.
Assembly
The parts Camera_case_03 and Camera_case_04 are joined together with M3x12 hexagon socket screws. The finished arm is then attached to the x-axis stepper motor.
In my housing I use a 12V power supply for the LED strips. So that I can also use this voltage for the ESP32 Cam, I got myself one of these ultra-compact DC-DC buck converters.