1 / 2
RedSea LED 90 spacer replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The RedSea LED 90 position is adjusted by tightening a screw going through a spacer. Unfortunately, the spacer breaks!
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 135
- Makes
- 1
- Views
- 473
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The RedSea LED 90 is a nice reef lighting which can be hanged above your tank or use a mounting arm.
In the latter solution, the position is adjusted by tightening a screw going through a spacer.
Unfortunately, the spacer easily breaks !
Several people have reported this in dedicated forums, and it happened to me, so here is a replacement.
I made it 1mm thicker than the original part, to be sturdier, and printed it with PETG.
I may try TPU some day but for now PETG is working well