S Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.28 net (excluding VAT)
For file: S_Hook_0.3mm_PLA_MK3S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hang up jeans, belts, purses, etc with this handy S Hook.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 297
- Makes
- 1
- Views
- 952
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This model is based on these hooks I got off amazon that I use to hang my pants. I didn't like how when doing laundry after I hooked on the jeans but laid them down without hanging up the end easily came off.
I printed these at 0.30 mm, 20% infill, 2 perimeters, with a brim. No supports.
Depending on what you're hanging you may want to increase the infill/perimeters for strength, but this is working for my jeans.
I've included a parametric fusion 360 model for easy remixing.
How to hang the pants nicely, without twisting.
On the back of the jeans, loop the hanger coming from the inside
Fold the jeans over so the back pockets are touching
Again from the inside direction pull the hanger through the other belt loop. 
And they'll hang flat!