Parametric Towel Hanger - Shower hanger for shower glass
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This parametric towel hook - shower hanger is designed to slot over glass enclosures. Base model has a 10mm slot.
- Rating
- 5 / 5
- Likes
- 166
- Downloads
- 629
- Makes
- 7
- Views
- 2,901
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This parametric towel hook - shower hanger is designed to slot over glass enclosures. Base model has a 10mm “slot” so as to fit my shower glass.
Created in Fusion 360. There are 5 parameters that can be adjusted - diagram included.
#1 - Controls the overall width/thickness of the hanger. It also dictates the radius of the pressure points at the end of each hook so as to maintain scale.
- NOTE result will be twice the integer used in #1.
#2 - Controls length of the “stem” linking the hooks at each end.
#3 - Controls width of the slot that fits over the shower glass. I printed mine with a .4 tolerance and it fits perfectly.
#4 - Controls the length of stem on the slot-side of the hanger.
#5 - Controls the size/radius of the towel hook.
- I have only printed in PLA+ with 0.4 hotend in standard settings at 0.2 layer height. Works perfectly.
- Perimeters more important than infill. I used 4-6 perimeters and 15-20 infill. Thin hangers can be all walls.