Parametric Towel Hanger - Shower hanger for shower glass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This parametric towel hook - shower hanger is designed to slot over glass enclosures. Base model has a 10mm slot.
- Ocena
- 5 / 5
- Polubienia
- 166
- Pobrania
- 629
- Wydruki
- 7
- Wyświetlenia
- 2901
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This parametric towel hook - shower hanger is designed to slot over glass enclosures. Base model has a 10mm “slot” so as to fit my shower glass.
Created in Fusion 360. There are 5 parameters that can be adjusted - diagram included.
#1 - Controls the overall width/thickness of the hanger. It also dictates the radius of the pressure points at the end of each hook so as to maintain scale.
- NOTE result will be twice the integer used in #1.
#2 - Controls length of the “stem” linking the hooks at each end.
#3 - Controls width of the slot that fits over the shower glass. I printed mine with a .4 tolerance and it fits perfectly.
#4 - Controls the length of stem on the slot-side of the hanger.
#5 - Controls the size/radius of the towel hook.
- I have only printed in PLA+ with 0.4 hotend in standard settings at 0.2 layer height. Works perfectly.
- Perimeters more important than infill. I used 4-6 perimeters and 15-20 infill. Thin hangers can be all walls.