RAMPS Holder for M150
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RAMPS holder for Malyan M150 source available on onshape attaches to the top of the box using 2 mount points original…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
RAMPS holder for Malyan M150
attaches to the top of the box using 2 mount points original melzi uses, the other side of the holder should be either glued using hotsnot (what I did) or using double sided tape. Even leaving it hanging is not a problem.
Standard M3 screws (I use the big flat ones normally used for mounting CD inside a case) are used to mount the mount inside the case while 2.2x7mm tapping screws (wood/plastic screws) are used to mount arduino to the mount. If you don't have screws you can hotsnot arduino to the mount too :D it works :)
Category: 3D Printer Parts