1 / 3
simple holder/feet for tektronix TM500 plugs — image 1
1 / 3

simple holder/feet for tektronix TM500 plugs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

skinny holder for a tektronix plug (AM503 current amp is what I use it with, but any TM500 module (…

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
117
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

skinny holder for a tektronix plug (AM503 current amp is what I use it with, but any TM500 module ( http://www.barrytech.com/tektronix/tektm500/tektm500.html ) should work.

I don't have the tektronix power supply where this TM500 plugs go in so I'm using home made psu for these plugs and this "holder" to keep it off the "ground"

source available on onshape: https://cad.onshape.com/documents/56f1cf66f891dfde93ce5c97/w/37739074f6fd411f2683b0b5/e/3cbf282d0c7c49a817df08b1

Print Settings

Printer:

my custom printer with no name

Rafts:

Doesn't Matter

Supports:

No

Infill:

20%

Notes:

I sliced with hexagon infill 20% and stopped the print (intentionally) before the top layer was printed so that I have the visible hexagon pattern ..

the parts are rather thin and long so if you are printing with ABS make sure you have good bed adhesion and bed at ~100C (or more) so your edges don't warp

you need a properly calibrated printer so that parts mesh together properly

Post-Printing

mesh them together

you add one part on top and one part on bottom of the module and mesh them together (dovetail link). if your printer is properly calibrated you won't need any post processing to mesh them together. if your printer is not properly calibrated then sand the parts a bit so that they mesh properly. (if you need a lot of sanding consider properly calibrating your printer, you can start with http://www.thingiverse.com/thing:52946 )

Category: Electronics

Tags