Dart Zone Outlaw Replacement Cylinder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Dart Zone Outlaw is a very sleek and easy to use blaster. It could be a secondary blaster for a lot of play…
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 71
- Makes
- 0
- Views
- 869
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Dart Zone Outlaw is a very sleek and easy to use blaster. It could be a secondary blaster for a lot of play styles. The only limitation is the quantity of cylinders. I have designed a replacement for the stock cylinder so you can have an infinite supply of cylinders if you like.
Hardware I use:
- M3x30mm Screw
1 x 0.5x6.30mm Spring
Honestly any 30mm spring that fits on an M3 screw should work.
You will only need supports for the numbered cylinder (make sure to have supports just from the plate. I use 10 degrees as my overhang limitation to prevent it messing up the numbers on the side of the cylinder.
Everything else is support free.
I have included the STEP file so any modifications can be done and improved upon.
Please do not resell these or distribute for profit. Please remix and document any changes. I would love to see what the community does with this. Maybe a belt fed cylinder?
Print Settings
Printer:
Bambu P1P
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
Hatchbox PETGOrange
Notes:
Support is only required for the numbered cylinder. Build plate support only and 10 degrees for the overhang.
Category: Hobby