Project Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexible project box / enclosure for electronics applications.
- Rating
- 4.5 / 5
- Likes
- 29
- Downloads
- 213
- Makes
- 4
- Views
- 865
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a customizable project box that can be printed fully enclosed or with interchangeable end panels for passing wires in or out. STL's are included for end panels with a side slot, center slot, double slot, or no slots. Also included panels with side and center slots in a larger size (7.5mm width).
Designed to use 4 - #6 x 1/2" countersunk screws or equivalent.
Fully enclosed enclosure requires only Box-FullyEnclosed.stl and Lid-FullyEnclosed.stl
Open-ended requires Box-OpenEnded.stl, Lid-OpenEnded.stl and two EndCaps.
Although this design is easily modified with Tinkercad or any other tool for editing an STL, the dimensions of this particular box are:
Outside Measurements: 100 x 65mm
Inside Measurements: 90 x 56mm
I printed the enclosure with Translucent PLA because I had electronics with LED's that I was hoping would be somewhat visible.
Print settings that I used were:
Layer Height: .2
Infill: 20%