Multicolor rings for Cryptex (single extruder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the letter rings for the "Cryptex", for very clean multi color prints (single extruder).
- Rating
- 4.909 / 5
- Likes
- 99
- Downloads
- 454
- Makes
- 14
- Views
- 3,065
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A remix for the letter rings of this beautiful Cryptex model.
Print Instructions
You can open the .3mf files as PrusaSlicer projects, or:
Print the rings with 0.2mm layer height, 0.4mm nozzle.
Print the letters with 0.1mm layer height, 0.25mm nozzle. Use 0.4mm nozzle (ideally with arachne perimeter generation) if you don't have 0.25mm. Add a color change where the letters start.
Assembly
Use CA glue/super glue to glue the letters on the ring.
The fit is pretty snug. If the fit isn't perfect then scale the letter model up or down a bit for a looser fit (e.g. 99.5 or 100.5%).