1 / 3
Khadas Toneboard Case - simple assembly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Khadas Toneboard with simply snap-on assembly - no screws required!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This is a simple snap-fit case for the Original Khadas Toneboard. The top part inserts into the bottom part via ridges and holds down the board using the rivet guides that insert into the pegs holding the PCB.
Print Settings:
- 5-10% infill
- no support needed
- you can use brim to avoid warping if you print with PETG, ABS or similar
- uses around 15g of filament for each part
- since the board gets pretty warm at times in my experience, I suggest printing it with heat-resistant filament
This is my first design so if you print it let me know if you like it!