LACK Exhaust (2.5") Retention Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.84 – €1.03 net (excluding VAT)
For file: Lack Vent Retention Plate_0.4n_0.2mm_PETG_MINIIS_41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 41.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Plexiglass retention bracket for 2.5" LACK exhaust connector.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I had several 2.5" router fence fittings laying around my garage and thought I'd repurpose them as exhaust connectors on my LACK enclosures. I was looking for a bracket to secure the connector as a pass-through on the rear plexiglass panel. I followed the drill pattern on the existing bracket and used spare hardware from one of my MK3S+ builds to secure the pieces together. I also used a hole saw to make an approximate opening in the plexiglass to allow for fumes to pass into the 2.5" connector.