1 / 6
Starfield Desk Fan (motorized, fits on PRUSA MINI+) — image 1
1 / 6

Starfield Desk Fan (motorized, fits on PRUSA MINI+)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is my own functioning recreation of Desk Fan from Starfield Video Game by Bethesda.

Rating
0 / 5
Likes
12
Downloads
36
Makes
0
Views
674
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This is my own functioning recreation of Desk Fan from Starfield Video Game by Bethesda.

NOTES:

  • Hardware used:
    • Glue (either CA Glue or Hotgun glue is OK).
    • Motor C9058-60071 1060363 3K1962E5 uses M2x8mm screws- Couldn't find documentation for this (this piece is probably from inkjet printer like HP… maybe 24Volts? Works with 12Volts, but it's very weak)
    • Switch KCD1-1
    • DC-017 & 12Volt wall adapter
    • I suggest to connect 3D printed with toothpicks in screwholes and hotglue, but M3x20mm screws + M3 nuts can be used too.

 

  • Some pieces require supports, but they are easy to remove
  • Notes are added to printable pieces, if you want to print them in different colors.
  • Added front grid piece (missing in photos)
  • The black metallic tubing is actually a car trunk strut, BE CAREFUL WHEN YOU BEND IT! (added printable mini legs + leg bases in case you have bent strut :) )
  • Find fan blades here (a bit of redesign in Prusa Slicer does the trick): Fan Blades

 

You can check the game-screen here on reddit (not my post!):

https://www.reddit.com/r/Starfield/comments/16as94d/who_brought_a_portable_fan_to_pluto_its_literally/

 

 

Expected print time of the kit with Prusa MINI+ is about 24 hours with 0.25 Layer Height and stock slicer configuration.

If you have any suggestions, let me know. I can do similar models if you provide screenshots.

Be creative :) 

Tags