1 / 6
Starfield Desk Fan (motorized, fits on PRUSA MINI+)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my own functioning recreation of Desk Fan from Starfield Video Game by Bethesda.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
This is my own functioning recreation of Desk Fan from Starfield Video Game by Bethesda.
NOTES:
- Hardware used:
- Glue (either CA Glue or Hotgun glue is OK).
- Motor C9058-60071 1060363 3K1962E5 uses M2x8mm screws- Couldn't find documentation for this (this piece is probably from inkjet printer like HP… maybe 24Volts? Works with 12Volts, but it's very weak)
- Switch KCD1-1
- DC-017 & 12Volt wall adapter
- I suggest to connect 3D printed with toothpicks in screwholes and hotglue, but M3x20mm screws + M3 nuts can be used too.
- Some pieces require supports, but they are easy to remove
- Notes are added to printable pieces, if you want to print them in different colors.
- Added front grid piece (missing in photos)
- The black metallic tubing is actually a car trunk strut, BE CAREFUL WHEN YOU BEND IT! (added printable mini legs + leg bases in case you have bent strut :) )
- Find fan blades here (a bit of redesign in Prusa Slicer does the trick): Fan Blades
You can check the game-screen here on reddit (not my post!):
Expected print time of the kit with Prusa MINI+ is about 24 hours with 0.25 Layer Height and stock slicer configuration.
If you have any suggestions, let me know. I can do similar models if you provide screenshots.
Be creative :)