LLL (Lithophane Looping Lamp)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slightly hybrid lamp: a mix of 3D and drawing, day and night, wood and plastic, physics and digital.
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 138
- Makes
- 0
- Views
- 1,263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A slightly hybrid lamp: a mix of 3D and drawing, day and night, wood and plastic, physics and digital.
"Pour toujours voyager" (“To travel forever”) or "Voyager pour toujours" (“Travel forever”) is just about never ceasing to dance round the world! :)
☀ This work has been done in partnership with Sunny Side Up: https://www.instagram.com/sunnysideupshow/ ☀
--
I used a common E14 lamp cord set found in a store (a bit like this one: https://laad.in/2XjiOAX )
You can either print the 3 feet or use standard 12mm diameter (0.47244 Inches) wood sticks as pictured.
--
This design is based on the same feet structure as another of my designs:
https://www.prusaprinters.org/prints/26889-paper-ball-lamp
Print Settings
Rafts:
Yes
Supports:
Yes
Resolution:
0.15 - 0.2
Infill:
100%
Notes:
Lamp to be printed bottom-down and feet upside-down.
Rafts: For the feet only
Supports: for the lamp only
Infill: 100% for the lamp, as you wish for the feet
Lamp takes 110g to print