Shelf Lip to keep things from falling off
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a thin lip to go on the edge of a shelf to keep small items from falling off. It has a 1 or 2 layer 20mm wide…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 95
- Makes
- 0
- Views
- 1,539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
This is a thin lip to go on the edge of a shelf to keep small items from falling off.
It has a 1 or 2 layer 20mm wide flat part that I affix to the shelf with double sided tape. The lip is 5 or so mm tall. The lip is 5 mm on the inside, but has a fillet on the visible side so that if you are looking at the shelf from a lower angle it is almost invisible.
Small enough to not be noticeable on a shelf the same color, large enough to prevent a bump on the shelf to have things come crashing down.
Saves me a lot of anxiety.
The shelf lip is 200mm wide. I have included the fusion files so that you can customize to your needs. I just printed them and snipped the last to fit the shelf, but if you want just extrude or push/pull the edge to the dimensions you want for a perfectly flush install.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
.2
Infill:
15
Filament:
Prusament PLA Galaxy Black
Category: Organization