Sunlu S4 Desiccant (Silica Gel) Dry Basket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basket to dry desiccant / silica gel in the Sunlu S4 filament dryer.
- Rating
- 4.5 / 5
- Likes
- 88
- Downloads
- 444
- Makes
- 4
- Views
- 4,492
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
These boxes fit exactly onto the space over the bearings of the Sunlu S4 filament dryer.
Simply dry your desiccant / silica gel at 70°C for a few hours, stir from time to time.
I recommend two boxes because air flow is better the less each box is filled.
It's mandatory to use a high temperature filament like ABS, ASA, PC or similar! PETG and PLA will not work. I tested PETG and the bottom deformed while using.
The holes/slots are 0.8mm wide.
No support needed. I used 3 walls and 4 top/bottom layers to get it stronger.