1 / 2
Sunlu S4 Desiccant (Silica Gel) Dry Basket — zdjęcie 1
1 / 2

Sunlu S4 Desiccant (Silica Gel) Dry Basket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Basket to dry desiccant / silica gel in the Sunlu S4 filament dryer.

Ocena
4,5 / 5
Polubienia
88
Pobrania
444
Wydruki
4
Wyświetlenia
4522
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I stopped uploading and updating my models here at Printables!

My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …

These boxes fit exactly onto the space over the bearings of the Sunlu S4 filament dryer.

Simply dry your desiccant / silica gel at 70°C for a few hours, stir from time to time. 

I recommend two boxes because air flow is better the less each box is filled.

It's mandatory to use a high temperature filament like ABS, ASA, PC or similar! PETG and PLA will not work. I tested PETG and the bottom deformed while using.

The holes/slots are 0.8mm wide.

No support needed. I used 3 walls and 4 top/bottom layers to get it stronger.

Tagi