1 / 5
Manual Solder Flux (Paste) Dispenser (Extruder)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and easy-to-print manual extruder handle for soldering flux (paste). Two different versions in the files.
- Rating
- 4.875 / 5
- Likes
- 271
- Downloads
- 1,098
- Makes
- 8
- Views
- 6,782
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a manual easy to print and use handle for extruding solder flux or paste. It prints without supports and in the files you can find 2 different versions of this. The difference between the versions is that one uses a bearing (11mmx4mm with a 4mm inner hole), while the other one relies on the contact between plastic parts. Both work great!
Parts needed for the version without the bearing:
- 3D Printed
- 1 x CenterNut NoBearingVersion.stl
- 1 x Flux Holder.stl
- 1 x Handle Half 1.stl
- 1 x Handle Half 2.stl
- 1 x Plunger Cap.stl
- Other parts
- 1 x M6 bolt (80-100mm)
- 4 x M3 10-16mm countersunk screws
- 1 x M5 24mm+ screw
- 1 x M5 lock nut



Parts needed for the bearing version:
- 3D Printed
- 1 x Center Nut.stl
- 1 x Flux Holder.stl
- 1 x Handle Half 1.stl
- 1 x Handle Half 2.stl
- 1 x Plunger Cap.stl
- Other parts
- 1 x M6 bolt (80-100mm)
- 4 x M3 10-16mm countersunk screws
- 2 x Bearing 11x4mm, inner hole 4mm
- 2 x M4 6mm screws
- 1 x M5 24mm+ screw
- 1 x M5 lock nut


If you have any questions, please let me know!