Replacement Chassis for Mehano TGV non powered car HO 1:87 (FDM Friendly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you needed to replace a non powered Mehano TGV power unit Printed flat with tree support
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed flat with tree support, worked like a charm on an old Alfawise u30
It's a no frills design for simpler FDM printing, if i get feedback for a more detailed version,
i'll gladly do it
If you needed to replace a non powered car chassis or just make a new one and get cheap top skin on ebay, here you go.
One flaw is that you will need the two bogie anyway,
Tested on 3rd radius curves and it works fine
I'm working on 3D modeling the TGV M and i needed to start with a chassis that i own and i could shorten, so keep your eyes peeled for it !
As a reminder: Please do not sell prints without my written permission