1 / 2
WH-1000xm3 Right Swivel Hanger Mechanism — image 1
1 / 2

WH-1000xm3 Right Swivel Hanger Mechanism

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the fragile plastic part within the Sony WH-1000xm3 headphones if you are looking for repair parts.

Rating
0 / 5
Likes
13
Downloads
171
Makes
1
Views
1,792
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Share Alike

Replacement part for Sony WH-1000xm3 inside the right swivel mechanism. There is a crappy plastic part that breaks if the headphones are overextended. This part has a small blue o-ring on the lowest ring and a metal ring ostensibly holding the swivel to the head piece. This was quite tricky to replicate but seems to work well.

Printing

I painted on supports inside the 3mf file. Otherwise any material that you can glue should be ok. I used Fusion Filament Proton Pink HTPLA+. 

Assembly

I uploaded the full part stl and also split in two in the 3mf file. Since the headphone wires go THROUGH this part there was no easy way to assemble this.

  1. I drilled out all the holes to get a bit more precise dimensions. If you do this you will need a 2mm and 1.5mm drill bit.
  2. Print the 3mf version which is two halves of the part, then assemble them around the wire after you've removed the broken part from the headphones. You may have to cut off the broken part since there is no obvious way to unroute the wire.
  3. Reassemble in reverse

hope this helps someone

Tags