1 / 2
X-Shot Longshot FAMAS Carrying Handle with 2 degrees Picatinny — image 1
1 / 2

X-Shot Longshot FAMAS Carrying Handle with 2 degrees Picatinny

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

As a certified Metal Gear Solid enjoyer, I designed a FAMAS carrying handle for the X-Shot Longshot. Picatinny ofc (2°)

Rating
0 / 5
Likes
43
Downloads
249
Makes
0
Views
2,551
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Update April 2024 - I suggest printing the carry handle in two parts, dovetailing it at the picatinny rail. This allows you to print it side down, costing less support material and also getting a more optimal print orientation for stronger mount on the carry handle.

Since the carrying handle acts as a big riser, I added a 2° angled picatinny rail. 

I wanted it to look correct aesthetically, so the sight picture is a tad odd due to the overall height. With both eyes open on a lower profile red dot, your left eye is the one seeing the dot. 

Bed size: 256 × 256 × 256 mm 

Print Orientation: I printed this diagonally for my bed size. 

I printed mine right-side up, which created a lot of support waste. You could try printing it upside down; just be aware that the rail is on an angle.

Mounts can be printed with the flat side down.

Infill: 5 walls, 40%

Hardware: 2x M3x30 , 2x M3 nuts

Tried using variable infill with 100% at the bottom bit where it mounts to the top of the blaster.

Also used variable layer heights at the top "fins" for smoother look.

V2 has a slightly lowered Picatinny rail.

Tags