Dark Princess (Hueforge Filament Painting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge filament painting (5 colors) of a dark princess
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 46
- Makes
- 1
- Views
- 520
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hueforge filament painting (5 colors) of a dark princess.
Update 22.12.2023
==============
For those of you who find the dark princess too dark :D
The picture was originally intended to radiate a rather gloomy atmosphere and not depict a radiantly bright and smiling princess. Still a lighter version was requested occasionally, which I would like to offer here as an alternative. Please keep in mind - the picture was created as a dark picture, so this lighter version may or may not be as visually appealing as you expect.
The STL is the same - the mesh did not change. Also the filaments are the same, I only adjusted the layers to change filaments:
Start with Black
- At layer #14 (0.76mm) swap to Navy Blue
- At layer #20 (1.0mm) swap to Grey
- At layer #29 (1.36mm) swap to Latte Brown
- At layer #34 (1.56mm) swap to White for the rest.
Original description below
====================
The photo shows an actual print of the model (scaled down to 130x130mm).
I like the more cartoon-ish look when printed with matte filaments - you will get smoother transitions with non-matte filaments.
For this print I used the following filaments:
- eSun PLA matte - Deep Black
- Eryone matte - Navy Blue
- eSun PLA matte - Dark Grey
- Bambu Lab PLA matte - Latte Brown
- eSun PLA matte - Milky White
Other filaments that I have tried also worked well... experiment with what you have!
The following PLA filaments also worked great:
- Bambu Lab Matte Charcoal
- Kexcelled Matte Navy Blue
- Bambu Lab Matte Ash Grey
- Bambu Lab Matte Latte Brown
- Bambu Lab Matte Ivory White
How to print:
- Start with Black
- At layer #7 (0.48mm) swap to Navy Blue
- At layer #25 (1.2mm) swap to Grey
- At layer #31 (1.44mm) swap to Latte Brown
- At layer #41 (1.84mm) swap to White for the rest.
The original STL is 200 x 200 mm. If you want to scale it down, please scale only X and Y - do not scale z (height).
Print with a layer height of 0.04mm and a first layer at 0.24mm. 100% infill (aligned rectilinear), 0.4mm nozzle. I recommend the slicer/speed settings from this Youtube video by the maker of Hueforge:
https://youtu.be/CGS7Adhyz2w?t=348
As usual, first slicing can take quite a while (> 2M triangles).