Dark Princess (Hueforge Filament Painting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge filament painting (5 colors) of a dark princess
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hueforge filament painting (5 colors) of a dark princess.
Update 22.12.2023
==============
For those of you who find the dark princess too dark :D
The picture was originally intended to radiate a rather gloomy atmosphere and not depict a radiantly bright and smiling princess. Still a lighter version was requested occasionally, which I would like to offer here as an alternative. Please keep in mind - the picture was created as a dark picture, so this lighter version may or may not be as visually appealing as you expect.
The STL is the same - the mesh did not change. Also the filaments are the same, I only adjusted the layers to change filaments:
Start with Black
- At layer #14 (0.76mm) swap to Navy Blue
- At layer #20 (1.0mm) swap to Grey
- At layer #29 (1.36mm) swap to Latte Brown
- At layer #34 (1.56mm) swap to White for the rest.
Original description below
====================
The photo shows an actual print of the model (scaled down to 130x130mm).
I like the more cartoon-ish look when printed with matte filaments - you will get smoother transitions with non-matte filaments.
For this print I used the following filaments:
- eSun PLA matte - Deep Black
- Eryone matte - Navy Blue
- eSun PLA matte - Dark Grey
- Bambu Lab PLA matte - Latte Brown
- eSun PLA matte - Milky White
Other filaments that I have tried also worked well... experiment with what you have!
The following PLA filaments also worked great:
- Bambu Lab Matte Charcoal
- Kexcelled Matte Navy Blue
- Bambu Lab Matte Ash Grey
- Bambu Lab Matte Latte Brown
- Bambu Lab Matte Ivory White
How to print:
- Start with Black
- At layer #7 (0.48mm) swap to Navy Blue
- At layer #25 (1.2mm) swap to Grey
- At layer #31 (1.44mm) swap to Latte Brown
- At layer #41 (1.84mm) swap to White for the rest.
The original STL is 200 x 200 mm. If you want to scale it down, please scale only X and Y - do not scale z (height).
Print with a layer height of 0.04mm and a first layer at 0.24mm. 100% infill (aligned rectilinear), 0.4mm nozzle. I recommend the slicer/speed settings from this Youtube video by the maker of Hueforge:
https://youtu.be/CGS7Adhyz2w?t=348
As usual, first slicing can take quite a while (> 2M triangles).