1 / 3
SOLDER SPOOL HOLDER
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple solder spool holder design
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Quick design I did for holding my soldering spools. I printed mine out of PLA with 3 parameters and it has been holding up great. When printing the 4x cross brace rods and the main spool holder axle I suggest using a brim of 3-5mm. Will also need 12 M3x14mm/ M3x15mm screws. Tap rods and Tighten lightly. Drill out/enlarge small holes on side plates if needed. Enjoy!