"Bounce" Camera Case for NONS SL660 instant film camera + 50mm Lens - Magnetic Snap Back - Contact for Alt. Lens or Camera!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D Printed Custom TPU Camera Case for the NONS SL660 Camera with the NONS 50mm lens.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to the Bounce Revolution! We were tired of traditional geeky camera bags and wanted something minimal, compact, light, and something that would protect our gear against even the roughest days of use. This case system is called the Bounce because that is exactly what it does, even when dropped from really high up, don't ask us how we know... Our cameras have never sustained any damage while snug in their Bounce Cases.
Now we know that we have a strange camera, if you want a case like this for a different camera or lens setup please reach out to us and we can come to an arrangement to have a custom case design made at no additional cost.
If you would like to order this item from us instead of printing it please visit our ETSY Store.
TO PRINT this we use DURAMIC or OVERTURE TPU 2 walls, 35% cubic infill, 5 top layers and 2 bottom layers. For the front of the case, we add support material to support the overhangs inside the case. Auto pause the print on the layer before the magnet voids are covered with a solid top layer and insert the magnets, alternating polarity as you insert them. Make sure the magnets in the back and front have the correct polarity match. We used these magnets for the magnetic Closure: Amazon.
