1 / 3
Googly Eye Button - Print in place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a print in place googly eye with small holes to allow it to be stitched onto fabric.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I took inspiration from https://www.printables.com/model/124365-googly-eye-button but have redesigned from scratch to be smaller and easier to print.
The tollerences are fairly loose as it needed to be able to turn freely once printed. I've tuned the tollerence for my specific printer and settings so results may vary.
My settings were: 0.12mm Layer height, with a 0.4mm Nozzle
I did a fillament swap for the last few layers to get the black/green shown in the pictures.