Elecraft KXPA100 fan shroud / plenum for 120mm (Noctua) fans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan shroud (inlet and plenum) for 2x 120mm Noctua fans.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
January 7, 2024:
Added some more performance data to the bottom of the original blog post on what happens with key down..
https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/
January 4, 2024:
I recorded a timelapse of 110W FT8 on 20m to show how (well) this works. Details in blog update on link below.
December 25, 2023:
Design improvement of the plenum. Article linked below is updated with more detail. Files updated.
December 22, 2023:
This is a two part model for an inlet and plenum to house 2x 120mm Noctua fans to cool the heatsink of an Elecraft KXPA100 amplifier. Please follow this link for more details:
https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/
Printed in Polymaker PLA Pro on Bambu X1-Carbon, .3MF, .STEP and .STL files are attached. The .3MF includes both the plenum and inlet part and a 50x50x50mm cube that you can print to ensure your shrinkage setting is correct in your filament profile for whatever filament you are using.