Elecraft KXPA100 fan shroud / plenum for 120mm (Noctua) fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud (inlet and plenum) for 2x 120mm Noctua fans.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
January 7, 2024:
Added some more performance data to the bottom of the original blog post on what happens with key down..
https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/
January 4, 2024:
I recorded a timelapse of 110W FT8 on 20m to show how (well) this works. Details in blog update on link below.
December 25, 2023:
Design improvement of the plenum. Article linked below is updated with more detail. Files updated.
December 22, 2023:
This is a two part model for an inlet and plenum to house 2x 120mm Noctua fans to cool the heatsink of an Elecraft KXPA100 amplifier. Please follow this link for more details:
https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/
Printed in Polymaker PLA Pro on Bambu X1-Carbon, .3MF, .STEP and .STL files are attached. The .3MF includes both the plenum and inlet part and a 50x50x50mm cube that you can print to ensure your shrinkage setting is correct in your filament profile for whatever filament you are using.