Hex Ukulele Plain Body
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Tomek's Hex Ukulele with a plain, hex-less face. Customize the plain body to anything you want!
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 169
- Makes
- 2
- Views
- 628
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
This is a remix of Tomek's awesome Hex Ukulele.
After building a couple, I wanted to customize them a bit more. So I modified his design to have a plain face on the body. From there, I was able to add text and images to design a few custom ukuleles.
I had the best success printing this with the settings in the attached .3mf.
3 walls, 0.2 layer height, 15% cubic infill. 5 top and bottom layers (1mm total thickness)
On one ukulele, I had a corner lift, so I have added an outer brim of 5 loops with a 0.15 brim object gap.
If you are printing in white, increasing the top and bottom layers will help hide the infill.
In an attempt to smooth out the back, I did NOT have great success with adaptive layer height. It wound up taking much longer and made the inside of the ukulele a stringy mess. So I would not recommend that at this time.