Hex Ukulele Plain Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Tomek's Hex Ukulele with a plain, hex-less face. Customize the plain body to anything you want!
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 628
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of Tomek's awesome Hex Ukulele.
After building a couple, I wanted to customize them a bit more. So I modified his design to have a plain face on the body. From there, I was able to add text and images to design a few custom ukuleles.
I had the best success printing this with the settings in the attached .3mf.
3 walls, 0.2 layer height, 15% cubic infill. 5 top and bottom layers (1mm total thickness)
On one ukulele, I had a corner lift, so I have added an outer brim of 5 loops with a 0.15 brim object gap.
If you are printing in white, increasing the top and bottom layers will help hide the infill.
In an attempt to smooth out the back, I did NOT have great success with adaptive layer height. It wound up taking much longer and made the inside of the ukulele a stringy mess. So I would not recommend that at this time.