1 / 4
Print Bed holder for all sizes! (Glue in Place) — image 1
1 / 4

Print Bed holder for all sizes! (Glue in Place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Freely adjust the Distance between both sides for universal fit!

Rating
0 / 5
Likes
8
Downloads
25
Makes
0
Views
267
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Made to glue in place using double-sided Tape, below a Drawer or the Table your Printer stands on

I recommend printing it standing up, with a Brim for better Adhesion.

I Printed this system with a layer height of 0.32mm with a 0.6mm Nozzle and the

Results are great. You can use regular old normal PLA, it is strong enough :)

 

215 mm long and 60mm Wide, if your printed is larger, no Problem. The rest can

support itself in the Air.

 

Clearance:

 

 

 

 

 

 

 

 

 

 

 

 

 

This is the side you have to glue to your Surface, the thick side is the End-Stop

Tags